Kraang Finds
More ▾
Products About
3D Printing Polymaker

Polymaker PolyDryer (Dryer Dock + Storage Box)

Dry the spool, then keep it sealed in the same box while it feeds the printer.

3D printer printing from a sealed filament dry box, with stored spools in clear boxes and a hygrometer on a rainy evening
Best for PETGTPU and nylondrying and printing from one sealed boxhumid workshops

Most filament dryers solve half the problem: they dry the spool, and then it goes back on an open spool holder and starts soaking up moisture again. The PolyDryer splits the job in two. The dock underneath does the heating, and the clear box on top is a sealed container that stays closed after drying, with a hygrometer so you can see the humidity inside.

Polymaker describes it as dry, store and print without breaking the seal: the filament feeds the printer straight from the box, so the spool doesn’t have to come out to print. That makes it a practical choice for PETG, TPU and nylon, which pick up moisture quickly once a spool is open.

Pro tip Drying time matters as much as temperature. Use the settings printed on the spool’s label, and let the box cool with the lid closed before you start printing, so warm, damp room air isn’t drawn back in.

Why we like it

  • ✓Two parts — a heated drying dock and a sealed storage box that lifts off it
  • ✓Dry, store and print from the same box without opening it
  • ✓Built-in hygrometer in the box shows the humidity inside
  • ✓Box has room for desiccant between drying sessions
  • ✓Fits 1.75, 2.85 and 3.00 mm filament on 1 kg spools

Keep in mind

  • !The listing doesn't state the temperature range — check it against your hottest-drying filament
  • !One dock dries one box at a time; extra boxes are sold separately
Includes
Dryer dock + 1 PolyDryer box
Spool
1 kg
Filament
1.75 / 2.85 / 3.00 mm
Materials (per Polymaker)
PLA, PETG, ABS, ASA, TPU, PA, PVB
Weight
1.3 kg
Model
PX01002_A

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing