Kraang Finds
More ▾
Products About
3D Printing Polymaker

Polymaker PETG Filament, 1.75 mm, 1 kg, Grey

A tougher, more heat-tolerant material than PLA for an enclosure that lives in a garage and gets knocked around.

3D-printed motion-activated LED light bar stuck by magnets under a steel shelf, lighting a workbench with spare strip and magnets on it
Best for Enclosures for shop lights and electronicstool holdersparts that get dropped

An enclosure for a shop light has two enemies: heat and drops. PLA starts to soften at around 140 °F (60 °C), a temperature a part can reach on a car in the sun or pressed against a warm LED strip. PETG holds its shape to a higher temperature and bends a little before it cracks, which is why it’s the usual choice for parts that live in a garage.

One spool is far more than one light needs; the rest covers brackets, hooks and a second enclosure once you’ve refined the first. Grey is a practical color on a bench: it hides dust and doesn’t glare next to the strip.

Pro tip Print the wall behind the LED strip at least 2 mm thick, and keep the strip in an open channel instead of a sealed box. The plastic lasts longer, and so do the LEDs, when the heat has somewhere to go.

Why we like it

  • ✓PETG takes knocks and warm places better than PLA
  • ✓Tough and impact resistant, Polymaker says
  • ✓Print settings are on the listing — nozzle 240–260 °C, bed 60–70 °C, fan 20–60%
  • ✓Cardboard spool; grey hides shop dust and fingerprints

Keep in mind

  • !Strings more than PLA; expect to tune retraction
  • !Needs a hotter nozzle than PLA and absorbs moisture once opened
Material
PETG
Color
Grey
Diameter
1.75 mm
Weight
1 kg
Nozzle
240–260 °C
Bed
60–70 °C
Part number
PB05003

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing