Kraang Finds
More ▾
Products About
3D Printing OVV3D

OVV3D Filament Vacuum Storage Bags, 30-Pack with Pump

Pull the air out and seal the spools you're not using — flat, dry and out of the way.

3D printer printing from a sealed filament dry box, with stored spools in clear boxes and a hygrometer on a rainy evening
Best for Backup spoolslong-term storagespools you print with only now and then

Boxes are great for the spools you print with every week. For the rest — backup colors, the PETG you use twice a year — vacuum bags are the more compact option. Pull the air out with the pump and seal the bag, and the spool sits in a small, dry pocket of air.

This kit has 30 large bags, a small automatic pump that fits the valve on each bag, and a desiccant pack for every bag. OVV3D sized the bags slightly larger than many others so wider cardboard spools fit too.

Pro tip Dry a damp spool first, then bag it. A vacuum bag keeps moisture out, but it doesn’t remove moisture already in the filament. Put the desiccant pack in the bag before you seal it.

Why we like it

  • ✓30 bags, sized at 32 × 34 cm for 1 kg spools
  • ✓Small automatic pump included — no hand pumping
  • ✓30 reusable desiccant packs and 5 bag clips in the kit
  • ✓Bags are reusable
  • ✓Takes up less shelf space than a box per spool

Keep in mind

  • !No humidity indicator — you can't tell when the desiccant inside is spent
  • !Storage only; the spool has to come out of the bag to print
Bags
30, 32 × 34 cm (12.6 × 13.4 in)
Pump
Automatic, 60 kPa (per OVV3D)
Includes
30 desiccant packs, 5 clips
Fits
1 kg spool, or up to 4 small 200–250 g spools

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing