Kraang Finds
More ▾
Products About
Workshop Oneida Air Systems

Oneida Dust Deputy Low-Pro Deluxe Separator Kit

A 4 in tall cyclone lid on a clear bucket with casters, ready to roll.

A compact yellow shop vac and a low-profile cyclone on a clear bucket connected to a sander at a workbench in a closed winter garage
Best for Portable shop-vac setupsunder-bench storagesanding and drywall dustanyone who wants to see the fill level

A tall cyclone on a bucket works, but it’s top-heavy and hard to move around a small shop. The Low-Pro takes the same idea and flattens it into a lid: air comes in through the side port, spins inside the lid, and the dust drops into the bucket before the air leaves for the vac. Oneida says it catches up to 99.9% of the debris.

For a portable kit, the useful part is everything around the lid. The bucket latches on, sits on casters, and the base has slots for hose fittings, so the separator, hose and adapters travel as one unit and the clear plastic tells you when it’s time to empty.

Pro tip Put a strip of tape on the bucket about two-thirds of the way up and empty it when the dust reaches the line. A bucket filled to the lid starts sending dust back into the vac.

Why we like it

  • ✓Only 4 in tall, so the rig stays low and stable instead of top-heavy
  • ✓Complete kit with the clear 5 gal bucket, latching lid, caster base, 3 ft hose and elbows
  • ✓Clear bucket shows the dust level at a glance
  • ✓Caster mounts have slots for storing hose fittings, and it works wet or dry, per Oneida

Keep in mind

  • !Ports are sized for standard 2.5 in vac hose fittings (2.25 in I.D.); a smaller vac may need a reducer
  • !A lid-style separator gives up some separation compared with a tall cone, so a good vac filter still matters
  • !The clear bucket is for viewing, not for heavy knocks; don't stand on it or use it as a step
Type
Low-profile lid cyclone separator kit
Height
4 in (lid)
Bucket
Clear, 5 gal
Ports
2.25 in I.D., for 2.5 in vac hose fittings
Included
Lid, latches, bucket, caster base, 2 in x 36 in hose, 2 elbows, gaskets, hardware
Model
AXD259922
Made in
USA

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Workshop