Kraang Finds
More ▾
Products About
Woodworking Oneida Air Systems

Oneida Dust Deputy DIY Cyclone Separator

The cyclone on its own, ready to bolt onto a bucket lid you choose.

A cyclone dust separator on a white 5 gallon bucket connected to a yellow shop vac, with a sander hose running up to a woodworking bench
Best for Shop-vac pre-separatorssanding and saw dustdrywall dustanyone who wants to build their own bucket rig

A cyclone pre-separator sits between the tool and the shop vac. Air comes in sideways, spins down the cone, and the heavy dust and chips fall out the bottom into a bucket before the air turns and leaves through the top. Oneida says the Dust Deputy catches up to 99.9% of the debris before it reaches the vacuum, which is the whole point: the vac’s filter stays clean and the suction stays up.

The DIY version is just the cyclone, a gasket and screws. That’s a feature if you want to build the rig yourself, because you choose the bucket, the lid and how it sits next to your vac. Oneida also sells complete kits with a bucket if you’d rather skip the cutting.

Pro tip Use the gasket as the template for the hole in the lid. Trace its inner circle, cut just inside the line, and the cyclone outlet will sit centered with the screw holes landing on solid plastic.

Why we like it

  • ✓Comes with the gasket and mounting hardware, so it bolts straight onto a flat lid
  • ✓Tapered 2 in ports take a range of common hose cuffs
  • ✓Anti-static body, per Oneida, which helps with fine dust clinging inside
  • ✓Works with any make of wet/dry vac, wet or dry, and is made in the USA

Keep in mind

  • !No bucket, lid or hose in the box; you supply and fit them yourself
  • !Hose cuffs don't always seal on the tapered ports first try; expect some tape or a reducer
  • !The tall cyclone on a bucket is top-heavy and easy to tip if you yank the hose
Type
Cyclone separator, retrofit (DIY)
Ports
Tapered 2 in (inlet and outlet)
Included
Cyclone, gasket, mounting hardware
Size
15.5 x 9.3 x 7.4 in
Use
Wet or dry
Model
AXD001004
Made in
USA

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking