Kraang Finds
More ▾
Products About
Woodworking MyArtscape

MyArtscape Graphite Transfer Paper, A4, 20 Sheets

Wax-free graphite sheets that put your printed pattern on the wood as erasable lines.

A finished woodburned 'NOEL' holiday sign on a basswood plank with bark edges, a pyrography pen and station beside it
Best for Transferring printed lettering and patterns to sign blankswood craftspainting projects

Very few people freehand a sign. The usual method is to design the lettering on a computer, print it, and trace it onto the wood. Graphite transfer paper goes between the printout and the board, and wherever you press, it leaves a thin gray line.

Wax-free graphite is the right kind for woodburning. Waxy carbon paper can leave marks that won’t erase and that an oil finish beads up on, while graphite lines that are still showing after burning can be lifted with an eraser or a light pass of fine sandpaper.

Pro tip Tape the printout to the board along one edge only, like a hinge. You can lift it to check how the transfer looks and lay it back down in exactly the same place.

Why we like it

  • ✓Wax-free graphite, so lines erase and the finish isn't blocked by a waxy residue
  • ✓Lines can be lifted with a kneaded eraser after burning
  • ✓Each sheet can be reused for several transfers, per MyArtscape
  • ✓A4 (8.27 x 11.69 in) sheets cover most of a sign in two pieces

Keep in mind

  • !The package says the lines are lighter than carbon paper, so press firmly
  • !A4 is shorter than a 14 in sign; long designs need two sheets side by side
  • !Graphite smudges if your hand rests on the transferred lines
Sheets
20
Size
A4, 8.27 x 11.69 in (210 x 297 mm)
Type
Graphite, wax-free
Color
Black

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking