Kraang Finds
More ▾
Products About
Woodworking Maple Landmark

Maple Landmark 1.5 in Wood Wheels with Axle Pegs, 100 Pack

A hundred solid wood toy wheels with a matching axle peg for each — enough for 25 cars.

A handmade maple wooden toy train with turned wheels and flush magnetic couplers on a workbench, a child's hand pulling the locomotive
Best for Wooden toy trainscars and trucksscout derby-style projectsclass and group toy builds

Wheels are the one part of a wooden train that’s hard to make well at home. A wheel cut with a hole saw is rarely perfectly round or centered, and the car wobbles as it rolls. Turned wheels with a centered hole and a matching peg solve that, and leave the fun part, the shape of the train, to you.

At 1-1/2 in, these wheels stand a bit lower than the bottom of a 3/4 in tall car when the axle sits at mid-height, so the car rides on the wheels, not on its belly. Pegs press into the side of the car and are glued there; the wheel spins on the peg’s shank.

Pro tip Drill one test hole in a scrap of the same maple and push a peg in. It should go in snug with light pressure. Too tight and the wood can split near the end of the car; too loose and only the glue holds it.

Why we like it

  • ✓Every wheel comes with its own matching axle peg
  • ✓Made in the USA by Maple Landmark, a Vermont toy maker
  • ✓1-1/2 in diameter and 1/2 in thick suits a car made from 3/4 x 2 in stock
  • ✓Enough for a big train, or a few trains to give away

Keep in mind

  • !100 is far more than one train needs
  • !Peg and hole size aren't listed, so you test-drill before the real holes
  • !Raw wood; sand any rough edge before finishing
Diameter
1-1/2 in (38 mm)
Thickness
1/2 in (13 mm)
Pack
100 wheels + 100 axle pegs
Material
Solid wood
Model
91043
Other sizes
3/4, 1, 1-1/4 and 2 in

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking