Kraang Finds
More ▾
Products About
Woodworking IRWIN

IRWIN Marples Forstner Bit Set, 14 Pieces

Fourteen Forstner bits for flat-bottomed pockets, from small magnet recesses to 2 in cargo bays.

A handmade maple wooden toy train with turned wheels and flush magnetic couplers on a workbench, a child's hand pulling the locomotive
Best for Magnet and hardware recessestoy detailshinge and cup holesclean holes in hardwood

A Forstner bit cuts a hole with a flat bottom and crisp sides instead of a cone, which is what you want for anything that should sit in a recess: a disc magnet, a steel washer, a round “load” in a cargo car. Twist bits and spade bits leave a point or a rough bottom that a magnet would rock on.

For a train, the small sizes recess the couplers flush with the car’s end, and the larger ones bore shallow pockets in the top of a car for pegs, beads or little logs to ride in. The 1/2 in bit matches the medium magnets in this build.

Pro tip Run large Forstner bits at a low speed, around the slowest setting of a small drill press, and lift the bit out every few seconds to clear chips. Maple scorches quickly when the bit spins too fast or packs with chips.

Why we like it

  • ✓Flat-bottomed holes, so a magnet or washer sits flat and flush
  • ✓Sizes from about 1/4 in to 2 in in one case
  • ✓Reduced shank on the large bits fits a 3/8 in chuck
  • ✓Clean edges in hard maple with little tear-out

Keep in mind

  • !Carbon steel dulls faster than carbide in a lot of hardwood
  • !Large bits are best used in a drill press, not handheld
  • !The listing doesn't spell out every size in the set
Pieces
14
Range
About 1/4 in (6.35 mm) to 2 in (50.8 mm)
Material
Carbon steel
Shank
Straight; reduced on 1-1/2, 1-5/8 and 2 in bits
Model
1966893

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking