Kraang Finds
More ▾
Products About
Woodworking Gamma2

Gamma2 Gamma Seal Lid

A spin-off lid that turns a plain bucket into a sealed one you can empty in seconds.

A cyclone dust separator on a white 5 gallon bucket connected to a yellow shop vac, with a sander hose running up to a woodworking bench
Best for Cyclone bucket lidssealed storageany bucket you open often

A cyclone only works if the bucket under it is airtight. Any leak at the lid lets air in from below, the swirl inside the cone falls apart, and dust gets carried up into the vacuum instead of dropping out. A snap-on bucket lid can seal, but it’s a pain to pry off every time the bucket fills.

The Gamma Seal solves both. The ring stays on the bucket for good, the center lid screws in against a gasket, and with the cyclone mounted on that center lid, emptying the bucket takes four moves: unscrew, lift, dump, screw back.

Pro tip Drill the cyclone onto the spin-off center lid, not the ring. Then the ring never moves, and the seal you tested once stays good.

Why we like it

  • ✓Two-part design, a ring that presses onto the bucket and a lid that screws into it
  • ✓Gasket seal keeps air out, which a cyclone needs to work
  • ✓Mount the cyclone on the spin-off part and emptying is a twist, not a fight with a snap-on lid
  • ✓Food-grade HDPE, made in the USA, fits standard 3.5 to 7 gal buckets

Keep in mind

  • !Pressing the ring onto the bucket rim takes force; a rubber mallet helps
  • !The lid is flat but not thick, so tighten the cyclone screws gently
  • !Sold for pet food and storage; using it for a cyclone means drilling it yourself
Parts
Adapter ring + spin-on lid
Fits
Standard 3.5, 5, 6 and 7 gal buckets
Diameter
About 12 in
Material
HDPE
Closure
Spin on / off
Model
4123

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking