Kraang Finds
More ▾
Products About
Woodworking Rhino Wood Industries

Rhino Wood 3/8 × 1-1/2 in Fluted Birch Dowel Pins, 100-Pack

Short birch pegs that lock one block onto the next, so a tower stays put but still comes apart.

A handmade modular marble run of maple blocks and pine ramps on a workbench, a child's hand dropping a glass marble into the top
Best for Stacking toy blocksdowel jointsfurniture and cabinet joinery

The pegs are what make the run modular. Every cube gets peg holes in two opposite corners of its top and bottom, and a loose pin bridges each pair of stacked cubes. Towers then stand straight and don’t slide apart when a marble lands, yet any block can be lifted off and moved to a new spot.

These pins are sold for glued furniture joints, but the same size works dry as a stacking peg. A pack of 100 covers fifty cubes with plenty left for ramp stops and new modules.

Pro tip Glue one pin into the bottom of each base-row cube only if you build on a baseboard. For everything else, leave the pins loose; the whole point is that kids can rebuild the run a different way every time.

Why we like it

  • ✓3/8 in diameter matches the 3/8 in Forstner bit
  • ✓1-1/2 in length splits evenly, 3/4 in into each of two stacked cubes
  • ✓Beveled ends find the hole easily, even for small hands
  • ✓Kiln-dried birch, a hardwood that holds up to repeated stacking

Keep in mind

  • !Fluted pins are made for glue; the grooves make a dry fit a little looser
  • !Dowel diameters vary slightly; drill a test hole before boring every cube
Size
3/8 × 1-1/2 in (9.5 × 38 mm)
Count
100
Wood
Kiln-dried birch
Ends
Beveled

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking