Kraang Finds
More ▾
Products About
Workshop LISHINE

LISHINE Baltic Birch Plywood Sheets, 12 × 12 × 1/4 in (8-Pack)

Square 12-inch sheets of birch plywood — enough blanks for a batch of ornaments, coasters or small signs.

Desktop CNC router with a birch sheet of cut-out ornaments, finished carved ornaments, coasters and a small sign on the bench
Best for Ornamentscoasterssmall signscut-out shapes

Most quick CNC gifts come out of thin sheet stock: ornaments, tags, coasters with a carved design, small layered signs. A pack of square sheets lets you nest a whole batch on one sheet and keep the rest for the next order, instead of cutting down a full 4 × 8 ft panel.

Birch plywood is a practical choice for this: the face is light and plain, so V-carved lines and painted fills stand out, and the cross-laminated plies resist warping in thin parts. The edges show the ply layers, which many makers treat as part of the look.

Pro tip Measure each sheet with calipers in a few spots and set your cut-out depth to the thickest reading plus a hair. “1/4 inch” plywood is often a little under or over, and tabs that don’t cut through are easier to fix than a scored spoilboard.

Why we like it

  • ✓12 × 12 in sheets fit most desktop CNC beds without cutting down
  • ✓About 1/4 in (6 mm) thick — right for ornaments and layered signs
  • ✓Light, plain birch face takes V-carving, paint and oil well
  • ✓Eight sheets — room for test cuts and a full batch

Keep in mind

  • !Craft-grade sheets — expect the odd void in the inner plies on cut edges
  • !Thickness is "approx." on the listing; measure before you set cut depth
Size
12 × 12 in (300 × 300 mm)
Thickness
About 1/4 in (6 mm)
Sheets
8
Material
Birch plywood, unfinished

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Workshop