Kraang Finds
More ▾
Products About
Maker Gear Wall Control

Wall Control 30-P-3232B Metal Pegboard (2 Panels)

Two steel pegboard panels for the wall behind the desk — slotted hooks and bins sit tight instead of popping out.

A maker desk with a parts cabinet, label maker, divided screw box, magnetic tray, project tray, pegboard and louvered wall bins
Best for Wall behind the deskhand tools and driversparts bins and cupscable and spool storage

A pegboard behind the desk keeps the tools you reach for every day — drivers, tweezers, pliers, a few parts cups — off the work surface and in plain sight. Hardboard pegboard gets the job done, but its holes wear out, and hooks pop out every time you pull a tool.

Wall Control’s panels are steel with a mix of round holes and slots. Their own slotted hooks and bins lock into the slots, so they stay put. The panels have a 3/4-inch flange built in, so they mount straight to the wall with no frame. Two black 16 × 32-inch panels make about a 32-inch square above a normal desk.

Pro tip Hang the board so its bottom edge is a hand’s width above the desk. That leaves room for a monitor or cabinet in front of it, and you can still reach the lowest row while sitting.

Why we like it

  • ✓Two 16 × 32 in steel panels, about 32 × 32 in side by side
  • ✓Slotted holes take Wall Control's locking hooks, bins and shelves
  • ✓Steel holes don't wear out like hardboard pegboard
  • ✓Built-in 3/4 in flange — no spacers or frame needed
  • ✓Mounts into studs or drywall

Keep in mind

  • !Panels only — hooks, bins and shelves are sold separately
  • !Needs drilling into the wall
Panels
2
Panel size
16 × 32 in (W × H)
Depth
3/4 in flange
Material
Powder-coated steel
Color
Black
Model
30-P-3232B

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Maker Gear