Kraang Finds
More ▾
Products About
Maker Gear Anker

Anker Nano Power Bank 10,000 mAh, 30 W, Built-in USB-C Cable

A sealed, charge-protected battery with its own USB-C cable — portable power without wiring bare LiPo cells.

A homemade black Raspberry Pi cyberdeck with a 7-inch screen and mini keyboard on a maker desk
Best for First cyberdeckportable Pi buildsanything that runs on USB-C power

Many cyberdeck videos show bare LiPo cells and boost boards. They work, but a punctured or overcharged LiPo is a real fire risk, and wiring one is not a weekend-beginner job. A good power bank does the same thing with charging, protection and a fuel gauge already sealed inside. Strap it into the case and the deck is portable.

The built-in USB-C cable plugs into the Pi, and the second port can power the screen. A Pi 5 at 5 V and 3 A runs a desktop, browser and terminal fine; it just limits power to USB devices, so use a wireless keyboard.

Pro tip Mount the power bank so its display and charge port face out through a cut-out in the case. You can then check the charge and top it up without opening the deck.

Why we like it

  • ✓10,000 mAh in a pocket-sized block (about 4.1 × 2.1 × 1 in)
  • ✓Built-in USB-C cable goes straight into the Pi — one less loose cable
  • ✓Extra USB-C and USB-A ports for the screen
  • ✓30 W fast recharging, Anker says about 50% in 45 minutes
  • ✓Display shows the remaining charge

Keep in mind

  • !Delivers up to 3 A at 5 V — enough for the Pi 5 at a reduced USB budget, not its full 5 A
  • !Not a UPS — unplug it to recharge separately and the deck shuts down
  • !Some power banks switch off at very low draw; an idle deck may need a tap on the button
Capacity
10,000 mAh
Max output
30 W
Ports
Built-in USB-C cable, 1 × USB-C, 1 × USB-A
Cell type
Lithium polymer
Size
4.09 × 2.06 × 1.02 in (10.4 × 5.2 × 2.6 cm)
Model
A1259

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Maker Gear