Kraang Finds
More ▾
Products About
Resin & Epoxy TotalBoat

TotalBoat ThickSet Deep Pour Epoxy, 2 Qt Kit

A 1:1 casting epoxy made for filling knots, cracks and inlays in wood, up to 1/2 in per layer on a slab.

A finished walnut live-edge charcuterie board with a turquoise epoxy inlay in a knot and crack, cheese and grapes on the wood
Best for Live-edge voidsinlays and small river poursdeep molds

Most clear resin sold for crafts is made for thin coats or small molds, and it heats up and cracks when poured into a deep knot. ThickSet is a casting epoxy: it’s mixed thinner and cures slower, so it can fill a crack in a 7/8 in board in one or two layers. The 1:1 ratio keeps the measuring simple.

One thing the listing doesn’t claim is food safety, and that’s normal for this kind of epoxy. On a charcuterie board, the resin is the decoration. The wood around it does the serving, which is why the inlay goes in voids and the board gets a food-safe oil on top.

Pro tip Measure, don’t eyeball: mix 1:1 by volume in a cup with marked lines, stir slowly for a few minutes and scrape the sides, then pour into a second clean cup and stir again. Unmixed resin from the cup wall is the usual cause of a soft, sticky spot in the finished inlay.

Why we like it

  • ✓Simple 1:1 mix ratio
  • ✓Rated for 1/2 in per layer on slabs and larger castings, up to 2 in in small molds
  • ✓TotalBoat lists live-edge slabs, deep voids and decorative inlays as intended uses
  • ✓Takes mica powder, alcohol ink and other epoxy colorants
  • ✓A 2-quart kit is a sensible size for a few boards, with less leftover than a gallon

Keep in mind

  • !Three days to full cure — the board can't be sanded and oiled the next morning
  • !Not sold as food-safe; keep food on the wood or on parchment, not on the epoxy
  • !Deeper voids need two or more layers, each one waiting on the last
Contents
1 qt resin + 1 qt hardener (2 × 946 ml)
Mix ratio
1:1 by volume
Pour depth
Up to 1/2 in per layer (slabs), up to 2 in (small molds)
Demold
About 24 hours
Full cure
3 days
Part number
521590

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Resin & Epoxy