Kraang Finds
More ▾
Products About
Resin & Epoxy TitanFlex (Schneider)

TitanFlex Black Nitrile Exam Gloves, 6 mil, 100 Count

A heavy 6 mil nitrile glove — the barrier between your skin and liquid epoxy from mixing to demolding.

Clear round resin ornaments with family and pet photos sealed inside, hanging on a lit Christmas tree branch
Best for Mixing and pouring epoxy resinhandling sticky moldscleanup and other messy shop jobs

Epoxy resin and hardener are skin sensitizers: one splash is rarely a problem, but repeated contact can cause an allergy that comes back with every later project. Gloves go on before the bottles open and come off only after the cups and sticks are in the trash.

The resin kit comes with two pairs, which is not enough for an afternoon of pouring. Gloves get changed every time resin lands on them, so a box of a hundred is the realistic amount.

Pro tip Peel a dirty glove off inside out and put on a fresh one rather than wiping it. If resin gets on your skin, wash it off with soap and water, never with alcohol or solvents, which help it soak in.

Why we like it

  • ✓6 mil nitrile, twice as thick as typical thin disposable gloves
  • ✓Latex-free and powder-free
  • ✓Textured fingers for grip on cups, bottles and wet molds
  • ✓Sizes S to XXL on the same listing

Keep in mind

  • !Wrist-length at 9.5 in — wear long sleeves for the pour
  • !Thicker nitrile means a little less fingertip feel for placing a small photo
  • !This link is size Large; pick your size on Amazon
Material
Nitrile, latex- and powder-free
Thickness
6 mil
Length
9.5 in (24 cm)
Grip
Textured fingers
Count
100
Model
HD20K03

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Resin & Epoxy