Kraang Finds
More ▾
Products About
DIY TOGGLER

TOGGLER SNAPTOGGLE Drywall Anchors with Bolts (12 Pack)

Steel toggle anchors that grip behind drywall — for the step that can't land on a stud.

A modular cat wall with pine steps on black 3D-printed brackets, carpet pads and a sisal-wrapped post, with a cat climbing
Best for Shelf steps between studscat-wall bracketsmounts on drywall or block

Studs rarely fall exactly where a cat wants the next step. For the small steps between the main perches, a toggle anchor is the strongest common option for hollow drywall. Plastic expansion anchors and self-drilling screws are fine for picture frames, not for something a cat pushes off from a dozen times a day.

SNAPTOGGLE’s steel channel flips behind the drywall and is held there by plastic straps, so you can bolt a bracket on, take it off to rearrange the wall, and bolt it back. For a modular system that changes over time, that matters.

Pro tip Use anchors for the small steps only. Put every main perch, and anything a cat jumps down onto from above, on studs. TOGGLER publishes failure loads, not working loads, and a landing cat hits much harder than its weight.

Why we like it

  • ✓A steel channel spreads the load across the back of the drywall
  • ✓The anchor locks in place before the bolt goes in — remove a shelf and the anchor stays
  • ✓Fits walls from 3/8 to 3-5/8 in thick, TOGGLER says
  • ✓Made in the USA

Keep in mind

  • !Needs a larger hole than a plastic anchor, so moving a step leaves a bigger patch
  • !The listing mixes sizes and load figures across variants — check the bolts that arrive before planning loads
Pieces
12 anchors + 12 round-head bolts
Material
Zinc-plated steel
Wall thickness
3/8–3-5/8 in
Part number
24200-Set 12

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More DIY