3M
3M High Strength Small Hole Repair All-in-One
Nail and screw holes, picture-hanger holes, dings and nicks in drywall
Snaps onto a gallon can and turns it into a pitcher — no paint in the rim, no drips down the side, no lid welded shut next time.
Every fight with a paint can starts at the rim. Paint fills the groove, the lid won’t seal, dried skin flakes into the paint, and pouring into a tray sends a river down the side of the can. A pouring lid skips the whole thing: it snaps over the rim, and the paint goes out through a spout, where you want it.
Allway’s Easy-Lid also has a wiping edge for the brush and a vent so the paint pours smoothly instead of glugging. Between coats, leave it on as a cover; the rim underneath stays clean, so the original lid goes back on without a hammer.
Pro tip Open the can with a proper can opener or the hook of a 5-in-1 tool, not a screwdriver: a bent rim is the one thing this lid can’t cope with. Before the original lid goes back on, punch a few nail holes in its groove, so any paint that lands there drains back into the can.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Nail and screw holes, picture-hanger holes, dings and nicks in drywall
Bosch
Hanging pictures in a row, shelves and cabinets, tile and wainscoting layout
Bosch
Room and wall measurements, flooring and paint estimates, measuring alone