Kraang Finds
More ▾
Products About
Maker Gear Raspberry Pi

Raspberry Pi 5 Active Cooler (Official)

The official clip-on heatsink and fan, so the Pi keeps its speed inside a closed handheld case.

A homemade black Raspberry Pi cyberdeck with a 7-inch screen and mini keyboard on a maker desk
Best for Pi 5 in a closed casecyberdeckslong compile or video jobs

Inside a sealed box with a screen bolted to the front, a Raspberry Pi 5 gets hot quickly, and when it does, it slows itself down. A cooler keeps the deck responsive. This is the one Raspberry Pi makes for the Pi 5: a finned aluminium heatsink over the processor with a small blower fan that only spins up when needed.

It clips into the board’s mounting holes and plugs into the dedicated fan connector, so there’s no wiring to work out. The thing to design around is airflow: give the blower an intake and an exit in the case.

Pro tip Put a vent slot right above the fan and another near the USB ports on the far side. Air drawn across the board and pushed out the other end keeps both the processor and the power circuitry cooler.

Why we like it

  • ✓Single-piece anodised aluminium heatsink
  • ✓Temperature-controlled blower fan — quiet at idle
  • ✓Spring-loaded push pins, no tools or drilling
  • ✓Thermal pads already applied
  • ✓Plugs into the Pi 5's own fan header

Keep in mind

  • !Adds height — check clearance between the board and the back of your case
  • !Push pins are meant to go on once; removing it can leave the pads damaged
  • !The blower needs an air path — cut vents in the case, or it just recirculates hot air
Fits
Raspberry Pi 5
Heatsink
Anodised aluminium, one piece
Fan
Temperature-controlled blower, 4-pin header
Mounting
Spring-loaded push pins
Weight
20 g
Model
SC1148

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Maker Gear