3M
3M Paint Project Reusable Respirator 6211, OV/P95, Medium
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
An ink pad the paw never touches — the dog presses on the clean side and the print lands on the card underneath.
The hard part of a paw print keepsake isn’t the resin, it’s the print: a dog that won’t stand still, and ink you’d rather not have on a paw that gets licked. A clean-touch pad solves the second problem. The ink sits on the side facing the card, the paw presses on the dry side, and nothing has to be washed off afterwards.
The window on this version fits small and medium paws. Measure the paw first: if it’s wider than about 2 in (5 cm), the Medium/Large pad on the same listing gives you room to miss the center a little.
Pro tip Do a dry run first: press the paw on plain paper without the pad, so the dog learns it’s a boring game with a treat at the end. Then make the real print on a hard surface such as a clipboard, and lift the paw straight up so the print doesn’t smear.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
CalPalmy
Popping bubbles in fresh resin pours, drying paint and ink, embossing and shrink film
Flasoo
Hanging resin ornaments, turning spare castings into keychains, resin charms and pendants
GLOVEWORKS
Mixing and pouring epoxy resin, demolding and cleanup, painting and messy shop jobs