3M
3M Paint Project Reusable Respirator 6211, OV/P95, Medium
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
The classic water-based decoupage sealer — a few thin coats seal a printed photo before it goes into resin.
A sealer between the print and the resin keeps the ink where it is. Without it, liquid epoxy can soften inkjet ink at the edges or creep into the cut edge of the print and leave a dark halo. A thin brushed coat on the front, the back and especially the cut edge closes all of that off.
Mod Podge is easy to find, a bottle covers dozens of test prints, and it washes off brushes with water. For this project it’s only a barrier, so the gloss finish doesn’t need to be perfect; the resin on top does the shine.
Pro tip Brush the first coat lightly and let it dry before adding more. A heavy first coat can make inkjet ink run. Two or three thin coats, then a night of drying, is the safe order before any resin touches the photo.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
CalPalmy
Popping bubbles in fresh resin pours, drying paint and ink, embossing and shrink film
Flasoo
Hanging resin ornaments, turning spare castings into keychains, resin charms and pendants
GLOVEWORKS
Mixing and pouring epoxy resin, demolding and cleanup, painting and messy shop jobs