Workshop Master Magnetics

Master Magnetics Telescoping Magnetic Pick-Up Tool with Scribe

Gets back the screw that just rolled behind the machine — and marks metal too.

Pen-sized magnetic pick-up tool with the scribe uncapped, lying on a sheet of steel on a workbench

Master Magnetics

Telescoping Magnetic Pick-Up Tool with Scribe

Kraang Finds

Best for Dropped screws and bitsengine baysmarking metal

Every workshop has a gap behind the bench, a slot under the table saw and an engine bay that eats screws. This is the pen in your pocket that gets them back: pull the wand out to 25 inches, touch the magnet to the screw, done. Unscrew the cap on the other end and there’s a steel scribe for marking metal, so it earns its pocket space twice.

Pro tip Slip a thin plastic bag over the magnet before you pick up metal shavings. Pull the bag off inside out over the trash and the shavings come off with it instead of sticking to the magnet.

Why we like it

✓Reaches 25 in into gaps your fingers can't
✓Pen-sized with a pocket clip, so it's there when something drops
✓Steel scribe under the cap for marking metal

Keep in mind

!Rated for 2.5 lb — the thin wand bends if you ask for more
!Small 0.30 in tip is for screws and bits, not for sweeping up shavings

Length: Up to 25 in (telescoping)
Magnet: Neodymium, 2.5 lb pull
Tip: 0.30 in diameter
Wand: Aluminum
Extra: Steel scribe under the cap
Carry: Pocket clip
Weight: 1.28 oz

Check price on Amazon

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.