3M
3M Paint Project Reusable Respirator 6211, OV/P95, Medium
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
Flat round cavities from 2 to 3 in across with the hanging hole already molded in — no drilling after the pour.
A photo ornament is a flat disc, and a flat round mold with the hole already in it removes the fiddliest part of the job. Drilling cured resin near the edge of a thin disc can crack it; here the hole is cast in place.
At 0.25 in deep, the largest cavity holds only about an ounce of mixed resin, so a set of ornaments uses very little. The smaller sizes suit gift tags or a matching keychain with the same photo.
Pro tip Wash the mold with mild soap, let it dry fully and lift any dust off the bottom with a piece of tape before pouring. In this kind of mold, the bottom of the cavity becomes the front of the ornament, right over the photo.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
CalPalmy
Popping bubbles in fresh resin pours, drying paint and ink, embossing and shrink film
Flasoo
Hanging resin ornaments, turning spare castings into keychains, resin charms and pendants
GLOVEWORKS
Mixing and pouring epoxy resin, demolding and cleanup, painting and messy shop jobs