3M
3M Paint Project Reusable Respirator 6211, OV/P95, Medium
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
A 1:1 casting epoxy made for small, shallow pieces — the kind of thin pour a flat ornament needs.
Most craft epoxies need a full day before a piece can leave the mold. This one is formulated to set faster, and it’s meant for exactly the small, flat castings that ornaments and pendants are. A thin pour doesn’t build up much heat, which is what makes a fast formula practical here.
The trade-off is working time. Mix only what you can pour in the next few minutes, and do the slow parts, like sealing photos and cleaning the mold, before the bottles are opened.
Pro tip If the resin looks cloudy in the bottle, it’s usually just cold. LET’S RESIN suggests warming the closed bottles in warm water before mixing. Dry them completely before opening; a drop of water in the mix shows up as a cloudy spot in the ornament.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
CalPalmy
Popping bubbles in fresh resin pours, drying paint and ink, embossing and shrink film
Flasoo
Hanging resin ornaments, turning spare castings into keychains, resin charms and pendants
GLOVEWORKS
Mixing and pouring epoxy resin, demolding and cleanup, painting and messy shop jobs