Kraang Finds
More ▾
Products About
Resin & Epoxy LET'S RESIN

LET'S RESIN 34 oz Crystal Clear Epoxy Resin Kit

A two-part casting epoxy that mixes 1:1, in a kit with the cups and sticks a first pour needs.

An ink paw print on a white card next to the same print sealed in a glossy round epoxy resin keepsake
Best for Small castings in silicone moldscoasters and keepsakesfirst resin projects

Epoxy resin comes as two liquids that harden only when mixed in the right ratio. With this kit the ratio is the easy one: equal volumes of A and B. The measuring cups and sticks are already in the box, which matters for a one-off gift project, because the pour can start as soon as the kit arrives.

A liter is far more than one keepsake needs, and that’s useful: the first mix can be a small test in a spare mold cavity before the real print goes in.

Pro tip In a cold room the resin thickens and holds on to bubbles. LET’S RESIN suggests standing both closed bottles in 122 °F (50 °C) water for 5–10 minutes, then working at room temperature. Dry the bottles before opening them; water in the mix leaves cloudy spots.

Why we like it

  • ✓Simple 1:1 mix by volume
  • ✓Kit includes measuring cups, small disposable cups and mixing sticks
  • ✓Six small mica powders included for a first try at color
  • ✓LET'S RESIN describes the formula as low-odor and UV-stabilized against yellowing
  • ✓About a liter in total — roughly a dozen 4-inch keepsakes poured 3/8 in thick

Keep in mind

  • !Cure time depends on room temperature and the size of the pour — treat 24 hours as the minimum
  • !Not suitable for tumblers, per the listing
  • !The included mica colors are 5 g samples
Contents
17 oz resin + 17 oz hardener (2 × 500 ml)
Mix ratio
1:1 by volume
Stirring
5 minutes, slowly
Cure
About 24 hours, longer in a cold room
Included
4 measuring cups (8 oz), 10 disposable cups, 4 sticks, 6 × 5 g mica

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Resin & Epoxy