3M
3M Paint Project Reusable Respirator 6211, OV/P95, Medium
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
Six round silicone cavities just under 4 in across — wide enough for most paw prints, with a glossy inside that gives a glossy casting.
In a silicone mold, the bottom of the cavity becomes the front of the piece. A glossy mold gives a glossy, glass-like face with no sanding or polishing, which is what makes a paw print under clear resin look finished.
The cavities are deeper than a keepsake needs. There’s no need to fill them: about 3/8 in (10 mm) of resin is enough for a disc that feels solid in the hand and stands on a small easel. The spare cavities are handy for a test pour or for prints of the other paws.
Pro tip Wash a new mold with mild soapy water, let it dry fully and lift any dust or dog hair out of the cavity with a piece of tape before pouring. Whatever sits on the bottom of the mold ends up on the front of the keepsake.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Resin work in rooms that are hard to air out, sanding cured resin, spray painting and solvents
CalPalmy
Popping bubbles in fresh resin pours, drying paint and ink, embossing and shrink film
Flasoo
Hanging resin ornaments, turning spare castings into keychains, resin charms and pendants
GLOVEWORKS
Mixing and pouring epoxy resin, demolding and cleanup, painting and messy shop jobs