Kraang Finds
More ▾
Products About
DIY HS

HS 4 in Mini Zip Ties, Natural White, 1000 Pack

Thin, milky-white ties that hold a neon tube to the panel and almost disappear against it.

Warm-white DIY neon rope sign glowing on a clear acrylic panel above a shelf, with neon tube and remote on a table
Best for Fixing neon rope and cables to drilled panelslight cable managementcraft projects

Small zip ties are the simplest way to hold neon rope on a drilled panel. Each tie goes down through one hole, up through its neighbor and closes behind the panel, so the lock and the cut tail are hidden at the back. Only a thin band crosses the tube at the front.

Natural white nylon is a good match for this. Over a lit tube a black tie reads as a gap in the line; a milky white one mostly blends into the glow.

Pro tip Pull each tie snug, not tight. Squeezing the silicone tube can leave a dent or a darker spot in the line. Cut the tails flush with flush-cut pliers so no sharp ends scratch the wall.

Why we like it

  • ✓0.1 in (2.5 mm) wide — threads through small holes and stays discreet in front of the light
  • ✓Natural nylon 66 color, close to the milky look of a neon tube
  • ✓18 lb tensile strength, plenty for a light tube
  • ✓1000 pieces; a sign uses dozens, and spares cost nothing to waste

Keep in mind

  • !Not truly transparent; the ties are visible up close
  • !Single-use — a misplaced tie has to be cut off
Length
4 in (100 mm)
Width
0.1 in (2.5 mm)
Max bundle
0.87 in (22 mm)
Tensile strength
18 lb
Material
Nylon 66, UL 94V-2
Count
1000

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More DIY