3M
3M 8511 N95 Cool Flow Valved Respirator (10-Pack)
Sanding, sawing, drywall, sweeping up, long sessions where a mask gets hot
A dotless 12 V strip with a barrel plug on each end — cut a piece and it plugs straight into a motion switch.
A work light is judged by its shadows. A row of separate LEDs throws several faint shadows behind every tool edge; a COB strip packs the chips so tightly that it behaves like one long, soft source. Cool white at 6000K with a high CRI helps wire colors and pencil lines look the way they do in daylight.
The detail that makes this strip a practical option for a battery build is the connectors: a female barrel plug on one end and a male on the other. Cut a piece from the female end and it plugs straight onto the output of a 12 V motion switch. The rest of the reel is enough for shelf or cabinet lighting later.
Pro tip Cut only at the marked copper pads, straight across, with sharp scissors. Then plug the piece in and check that it lights along its whole length before you peel the backing; a strip is much easier to fix before it’s stuck down.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Sanding, sawing, drywall, sweeping up, long sessions where a mask gets hot
3M
Fixing sensors and cable clips inside an enclosure, steel docking plates for magnetic tools, permanent mounting on metal and plastic
Anker
Laptops, phones, card readers, LED lights, USB-C rechargeable tools
Anker
Charging tool batteries away from an outlet, craft-market booths, job sites, outage backup