Kraang Finds
More ▾
Products About
Maker Gear wolfcraft

wolfcraft microfix Mini Spring Clamp Set (6 clamps + key ring)

Six tiny spring clamps with pivoting tips — a third hand for gluing and holding parts too small for a real clamp.

Maker bench with a rotary tool, pin vise, needle files, precision driver kit and mini clamps on a cutting mat
Best for Gluing model partsholding small pieces while glue setspainting and sanding small partscrafts

Most clamps are too big and too strong for model work: they cover the part, and they crush it. A mini spring clamp holds a wing on a fuselage or two thin strips of basswood while the glue grabs, and nothing more. Squeeze, place, let go.

wolfcraft’s microfix clamps have small pivoting pads on the tips, so they sit square on tapered or angled parts instead of slipping off. Six of them in different colors hang together on a key ring, which keeps them from disappearing into the bench clutter.

Pro tip Put a scrap of wax paper or tape between the jaw tips and the joint. Glue that squeezes out will stick the clamp to the part, and peeling it off later takes the paint with it.

Why we like it

  • ✓Small enough for model and miniature parts
  • ✓Pivoting, color-coded jaw tips sit flat on angled surfaces
  • ✓One-hand operation
  • ✓Key ring to keep the set together on a hook

Keep in mind

  • !Light clamping force — fine for glue-ups of small parts, not for bending wood
  • !The jaw opening is small, so thick parts won't fit
Clamps
6
Also included
Key ring
Jaw tips
Pivoting, color-coded
Weight
About 0.07 kg (2.5 oz), set
Model
3420000

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Maker Gear