3M
3M High Strength Small Hole Repair All-in-One
Nail and screw holes, picture-hanger holes, dings and nicks in drywall
A thin, flexible stainless blade that leaves spackle flat with the wall instead of a ridge around the hole.
Most patched holes that still show after painting weren’t filled badly, they were left too thick. A stiff knife drags the spackle and leaves a ridge around the hole. A flexible one bends flat against the wall and scrapes the excess off in one pass.
Warner grinds the 90128’s blade thinner toward the edge, so it flexes more than a standard putty knife. That makes it a spreading tool for light compounds: nail holes, picture-hanger holes, small cracks and dings in trim. The blade is stainless, so leaving a little spackle on it overnight won’t turn it into a rusty one.
Pro tip Press the patch in with the knife held almost upright, then lay it nearly flat and pull across once to scrape it level. Two thin coats sand easier than one thick one.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Nail and screw holes, picture-hanger holes, dings and nicks in drywall
Allway
Pouring paint into trays and cups, wiping the brush, keeping the can rim clean between coats
Bosch
Hanging pictures in a row, shelves and cabinets, tile and wainscoting layout