Kraang Finds
More ▾
Products About
Maker Gear Titebond

Titebond Instant Bond Accelerator Spray, 5.5 oz, 6319

One short spray and the super glue you already own sets while you hold the part — no more pinching a piece together hoping it stays.

Maker workbench with a chair clamped for repair and a hot glue gun, accelerator spray, epoxy syringe, UV pen and glue injector laid out
Best for Setting CA joints instantlyporous wood and MDFgap-filling CAparts you can't clamp

Super glue is fast on a smooth surface and slow on exactly the materials repairs are made of: bare wood, MDF, a broken ceramic edge. On those it can take a minute or more, and the part moves while you wait. An accelerator cures the CA the moment it touches it.

The method is the same for any brand: glue on one part, a short mist of accelerator on the other, press them together and let go. It also unlocks thick, gap-filling CA for repairs where the pieces don’t meet perfectly, since the thick stuff is the slowest to set by itself. Titebond makes this one for its Instant Bond line, but it is the standard heptane-based accelerator you’ll find under other CA brands.

Pro tip Spray the part that gets no glue, not the glue bead. Spraying into wet CA can make it foam, turn white and set before you’ve closed the joint. Keep the can away from the soldering iron and the heat gun; the label is serious about the flammable part.

Why we like it

  • ✓Aerosol — a quick, even mist instead of a pump that spits
  • ✓Titebond says it cures its Instant Bond CA adhesives instantly; it's the same heptane-based type other CA brands sell
  • ✓Made for acidic and porous surfaces like wood, where plain CA can take minutes to grab
  • ✓Lets you use thick, gap-filling CA, which is slow to set on its own
  • ✓Made in the U.S.A. with imported materials, the label says

Keep in mind

  • !Extremely flammable and the vapors are harmful — spray with ventilation, away from anything hot
  • !Heavy spray can leave a white frost on the glue line; a short burst is enough
  • !A CA joint that's forced to set fast is a bit more brittle than one left to cure on its own
Size
5.5 oz (156 g)
Form
Aerosol
Base
Heptane
For
Cyanoacrylate (CA) adhesives
Made in
U.S.A. (imported materials)
Model
6319

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Maker Gear