Kraang Finds
More ▾
Products About
Pet Gadgets PetSafe

PetSafe Drinkwell Premium Carbon Filters (12-Pack)

A flat, standard-size carbon filter you can design a slot around — and buy again for years.

Battery-powered DIY pet fountain with a glass bowl and printed top on a patio, a cat drinking
Best for DIY fountains with a printed filter slotPetSafe Drinkwell fountain owners

The easiest way to make a DIY fountain’s filter easy to swap is to design around a filter that already exists. These flat pads are made for PetSafe’s Drinkwell fountains, which means they’re sold everywhere and the size doesn’t change from batch to batch. Print a slot that matches, and every refill fits.

Carbon helps with taste and odor, and the fabric catches hair and food bits before they reach the pump. That second job matters most in a small fountain, where a clogged impeller is the most common failure.

Pro tip Measure a filter with calipers before you design the slot and add about 0.5 mm of clearance on each side. A slightly loose filter slides out wet; a tight one tears.

Why we like it

  • ✓Flat pad about 3.3 × 4 in and under 1/4 in thick, easy to fit in a printed slot
  • ✓Activated carbon from coconut shells
  • ✓Each filter lasts 2–4 weeks, PetSafe says; 12 is close to a year of changes
  • ✓Fits PetSafe Drinkwell fountains, so refills are easy to find

Keep in mind

  • !Made for Drinkwell fountains; in a DIY build, the fit depends on your slot
  • !Carbon dust rinses out on the first use, so rinse each new filter before it goes in
Size
about 3.31 × 4 × 0.19 in (8.4 × 10.2 × 0.5 cm)
Material
Activated carbon (coconut shell)
Pack
12 filters
Change interval
2–4 weeks (PetSafe)
Model
PAC00-16150

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Pet Gadgets