3M
3M High Strength Small Hole Repair All-in-One
Nail and screw holes, picture-hanger holes, dings and nicks in drywall
Let go of the trigger and the caulk stops — so the bead ends where you want it, not on the floor.
A cheap caulking gun keeps pushing after you stop squeezing, so every pause leaves a blob and every move to the next joint leaves a trail. That’s why so many caulk jobs look worse than the old bead they replaced.
The 930-GTD is a drip-free gun: when you release the trigger, the pressure on the tube comes off and the flow stops. Newborn also builds the small tools onto the gun itself — a spout cutter, a wire to puncture the seal, a scraper and a finishing square with four bead profiles — so they don’t wander off in a drawer.
Pro tip Cut the nozzle small and at an angle; you can always cut more. Push the bead ahead of the nozzle rather than pulling it, and keep a roll of paper towels and the right solvent for your caulk (water for latex, mineral spirits for some others) within reach.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Nail and screw holes, picture-hanger holes, dings and nicks in drywall
Allway
Pouring paint into trays and cups, wiping the brush, keeping the can rim clean between coats
Bosch
Hanging pictures in a row, shelves and cabinets, tile and wainscoting layout