3M
3M 62023 Multi-Purpose Reusable Respirator, OV/AG/P100, Medium
Grinding concrete, rolling floor coatings, sanding and spraying in the garage
A compact 9-sensor stud finder that lights up the full width of a joist through drywall, with a green LED on the center.
An overhead lift is only as strong as the wood the lag screws go into, so the first tool for this job isn’t the drill. Edge-finding stud finders tell you where a joist starts; the M150’s row of sensors shows the whole width, and the green center light tells you where a screw has the most wood around it.
That matters on a ceiling: a lag screw that catches the edge of a 1½ in wide joist can split it or pull out. Mark both edges and the center along the full length you plan to use, because joists aren’t always perfectly straight.
Pro tip After marking, drill one small pilot hole at the center mark. If the bit hits solid wood all the way and brings down wood shavings, not just drywall dust, your marks are right.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Grinding concrete, rolling floor coatings, sanding and spraying in the garage
ANCEL
Check engine light, reading and clearing codes, emissions readiness, used car checks
AstroAI
Cold-morning pressure top-ups, the low-tire light, bike tires, a slow leak on the way to the shop
Black Diamond
Jump starts after dark, changing a tire at night, looking under the hood, power outages