Kraang Finds
More ▾
Products About
Garage DEWALT

DEWALT Titanium Nitride Drill Bit Set, 14-Piece (DW1354)

Fourteen titanium-coated bits from 1/16 to 1/2 in with a pilot-point tip, in a case that clips into DEWALT's storage system.

A garage with a white storage lift platform of yellow-lidded totes raised near the ceiling and a clear floor below
Best for Pilot holes for lag screwsdrilling steel brackets and woodgeneral garage drilling

Driving a 5/16 in lag screw straight into a joist without a pilot hole is how joists split and screws snap. The right pilot is roughly the size of the screw’s solid core, and the lift’s manual usually names it. A set with every size from 1/16 to 1/2 in means you’re not guessing or making do with the closest bit in the drawer.

The pilot-point tip matters more overhead than on the bench: you’re pushing up, often on a ladder, and a bit that skates across the drywall puts the hole off your center mark.

Pro tip Wrap a piece of tape around the bit at the screw’s length as a depth stop, and wear safety glasses — drilling overhead sends drywall dust straight down into your face.

Why we like it

  • ✓14 sizes from 1/16 to 1/2 in, enough to match the pilot size for most lag screws
  • ✓Pilot Point tip starts without walking, which helps when drilling overhead
  • ✓Titanium nitride coating, for wood, metal and plastic
  • ✓Case with removable bit bars and a clear lid

Keep in mind

  • !Standard jobber length, not extra-long; for deep holes through thick framing you may need a longer bit
  • !Not impact-rated — use it in a drill, not an impact driver
Pieces
14
Sizes
1/16 to 1/2 in
Tip
Pilot Point, 135°
Coating
Titanium nitride
For
Wood, metal, plastic
Case
8.75 × 8.75 × 1.4 in
Model
DW1354

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Garage