7 Cordless Tools Worth Owning Before Anything Else
Drill, drive, cut, demolish and clean up — seven cordless tools on one battery system, in the order worth buying them.
Published October 10, 2026 · 7 picks
At a glance
7 picksAs an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
DEWALT 20V MAX Compact Drill/Driver Kit (DCD771C2)
The kit with the batteries and charger — every tool after it can be bought bare.
The drill/driver is the tool you’ll reach for most, and buying it as a kit is what sets up everything else: the batteries and charger in the box run every other 20V MAX tool, so the next tools on this list can be bought as bare tools. That’s the main reason to start here rather than with a bigger, fancier drill.
The DCD771 is a plain compact drill: two speeds, a 1/2-inch chuck and a clutch for driving screws without stripping them. It covers holes in wood and metal, furniture assembly and the usual hanging-things-on-walls jobs.
Pro tip Use the low speed (1) for driving screws and the high speed (2) for drilling. Start a screw with the clutch on a low number and turn it up until the screw sits flush — that’s how you stop stripping heads and splitting trim.
Why we like it
- ✓Kit includes the drill, two 20V MAX batteries, a charger and a bag
- ✓Two-speed gearbox (0–450 and 0–1,500 rpm) for driving and drilling
- ✓1/2-inch single-sleeve ratcheting chuck takes larger bits
- ✓300 unit watts out (DeWalt's power rating)
- ✓3-year limited warranty
Keep in mind
- !The included packs are small (1.3 Ah per the listing) — fine for the drill, short-lived on a saw or vacuum
- !Brushed motor and no hammer mode, so it's not the tool for drilling concrete
- Voltage
- 20V MAX
- Speeds
- 2 (0–450 / 0–1,500 rpm)
- Chuck
- 1/2 in, single-sleeve ratcheting
- Power
- 300 UWO (per DeWalt)
- In the box
- Drill, 2 batteries (1.3 Ah), charger, bag
- Model
- DCD771C2
DEWALT 20V MAX XR Brushless Impact Driver (DCF887B)
Sinks long screws and lag bolts the drill would stall on.
A drill and an impact driver look alike, but the impact driver adds rotational hammer blows when the screw resists. That’s what lets it sink a 3-inch deck screw or a lag bolt without twisting your wrist or stalling, and what makes it the tool for loosening a fastener that won’t move.
The DCF887 is brushless and has three speed settings, so it can also drive small screws gently. Once you have one, the drill stays loaded with a drill bit and the impact driver does the driving — no more swapping bits every few minutes.
Pro tip Buy impact-rated bits. Regular screwdriver bits are hard and brittle and can snap under the hammering; impact bits are made to flex a little, and they last much longer in this tool.
Why we like it
- ✓Brushless motor
- ✓Three speed settings, with a precision drive mode in speed 1
- ✓One-handed loading 1/4-inch hex chuck, accepts 1-inch bit tips
- ✓Three LEDs with a 20-second delay after you release the trigger
- ✓Compact body, about 2 lb tool only
Keep in mind
- !Tool only — needs a 20V MAX battery and charger (the drill kit covers that)
- !Takes 1/4-inch hex bits only; round-shank drill bits won't fit, and it's loud compared to a drill
- Voltage
- 20V MAX XR
- Motor
- Brushless
- Speeds
- 3, with precision drive mode
- Chuck
- 1/4 in hex, one-handed loading
- Weight
- About 2 lb (tool only)
- Model
- DCF887B
DEWALT 20V MAX XR Brushless Oscillating Multi-Tool (DCS356B)
Cuts flush, in corners and inside walls, where no other saw fits.
An oscillating tool doesn’t spin — it wiggles its blade back and forth a few degrees, very fast. That’s why it can plunge straight into a floor or a wall and cut flush against another surface: undercutting door jambs for new flooring, cutting an outlet hole in drywall that’s already hung, or trimming a nail sticking out of a board.
Swap the blade for a scraper or a sanding pad and it does old caulk, detail sanding and paint removal in corners. The universal adapter matters here, because accessories are what you’ll keep buying.
Pro tip Let the tool do the work and move the blade slightly side to side while you plunge. Pushing hard only heats the blade and dulls the teeth; a light touch with a gentle rocking motion cuts faster.
Why we like it
- ✓Brushless motor (DeWalt says up to 57% more runtime than brushed)
- ✓Three speed ranges up to 20,000 oscillations/min plus a variable speed trigger
- ✓Tool-free Quick-Change blade system
- ✓Universal adapter takes most brands' oscillating accessories
- ✓LED light; 3-year limited warranty
Keep in mind
- !Tool only — battery, charger and accessories sold separately
- !Slow for long, straight cuts; blades wear quickly in metal and nails
- Voltage
- 20V MAX XR
- Motor
- Brushless
- Speeds
- 0–13,000 / 0–17,000 / 0–20,000 OPM
- Blade change
- Tool-free, plus universal accessory adapter
- Weight
- About 2.4 lb (tool only)
- Model
- DCS356B
DEWALT 20V MAX Cordless Wet/Dry Shop Vac, 2 Gallon (DCV580H)
Wet or dry cleanup anywhere, with no cord to drag over the mess.
A cordless shop vac is the tool people buy last and then wish they’d bought first. It goes wherever the mess is — the far end of the driveway, the car, the attic — with no extension cord to drag over freshly cut boards. Running on the same batteries as the saws means cleanup happens right after the cut, not at the end of the weekend.
It handles wet pickup too, so a spilled bucket or a sink trap you’re about to open is covered. The HEPA-rated filter is washable, which matters when you vacuum fine drywall or sanding dust.
Pro tip Take the filter out before vacuuming water and let it dry completely before dry pickup again — a damp filter cakes with dust and clogs in seconds. Empty the tank after wet jobs so it doesn’t start to smell.
Why we like it
- ✓Wet and dry pickup, 2-gallon tank
- ✓Washable, reusable HEPA-rated filter (99.97% at 0.3 microns, per DeWalt)
- ✓Crush-resistant 5 ft × 1-1/4 in hose
- ✓Onboard storage for the crevice tool and wide nozzle
- ✓3-year limited warranty
Keep in mind
- !Tool only — and a vacuum drains a battery fast, so use your biggest pack
- !A 2-gallon tank fills quickly; it's a cleanup vac, not for emptying a flooded basement
- Voltage
- 20V MAX
- Tank
- 2 gal, wet/dry
- Filter
- HEPA-rated, washable
- Hose
- 5 ft × 1-1/4 in
- Included
- Hose, filter, wide nozzle, crevice tool
- Model
- DCV580H
DEWALT 20V MAX 6-1/2 in. Cordless Circular Saw (DCS391B)
Straight cuts in lumber and plywood, right on the sawhorses.
Once you start building things — a shelf, a raised garden bed, a workbench — you need to cut boards to length and sheets of plywood to size. A circular saw does both, and a cordless one does it on sawhorses in the driveway without an extension cord in the way of the blade.
The 6-1/2 inch blade is the common size for battery saws: lighter and easier to handle than a full-size corded saw, and enough for 2x lumber and plywood, which is most of what a home garage cuts.
Pro tip Set the blade depth so it sticks out only about 1/4 inch below the board. It cuts cleaner, kicks back less and puts less of the blade in the open. Support both sides of the cut, so the piece doesn’t drop and pinch the blade.
Why we like it
- ✓6-1/2 in blade, a size that suits a battery saw
- ✓Bevels from 0 to 50°
- ✓Magnesium shoe — light and stays flat
- ✓Rubber overmolded grip
- ✓3-year limited warranty
Keep in mind
- !Tool only — and a saw wants a 4–5 Ah pack, not the small batteries from a drill kit
- !Brushed motor, and a 6-1/2 in blade cuts less deep than a corded 7-1/4 in saw
- Voltage
- 20V MAX
- Blade
- 6-1/2 in
- Speed
- About 5,100 rpm
- Bevel
- 0–50°
- Shoe
- Magnesium
- Model
- DCS391B
DEWALT 20V MAX XR Brushless Compact Reciprocating Saw (DCS367B)
Through nails, pipe and branches when something has to come apart.
A reciprocating saw is about taking things apart: cutting through a nailed-together frame, a rusted bolt, an old pipe, a fence post or a branch that’s too thick for loppers. Change the blade and the same saw goes from wood to metal to plaster.
The DCS367 is the compact version, 14.5 inches long, so it fits between wall studs and under sinks where a full-size saw won’t go, and at about 5 lb it’s easier to hold up overhead or one-handed for a moment.
Pro tip Press the saw’s shoe firmly against the work while cutting. That’s what stops the blade from bucking and rattling the saw in your hands. Before cutting into a wall or floor, shut off the power and water and check for wires and pipes.
Why we like it
- ✓Brushless motor
- ✓Compact 14.5 in length fits between studs
- ✓About 5 lb tool only
- ✓Keyless 4-position blade clamp
- ✓1-1/8 in stroke, up to 2,900 strokes/min; LED light
Keep in mind
- !Tool only — battery and blades sold separately
- !Rough, fast cuts — not the saw for anything that has to look neat
- Voltage
- 20V MAX XR
- Motor
- Brushless
- Stroke
- 1-1/8 in
- Speed
- 0–2,900 SPM
- Length
- 14.5 in
- Weight
- About 5 lb (tool only)
- Model
- DCS367B
DEWALT 20V MAX 5Ah Battery Starter Kit (DCB205-2CK)
Two 5 Ah packs and a second charger, so the saws and the vac don't run dry.
This is the part of buying cordless tools that’s easy to get wrong. The bare tools on this list are only useful if you have enough battery to run them, and the small packs that come with a drill kit run out fast in a saw or a vacuum. Two 5 Ah packs are the practical fix: one in the tool, one on the charger.
Sticking to one battery system is the real point of this list. Every tool here takes the same 20V MAX pack, so each new tool is just the tool, and the batteries you already own keep working with all of them.
Pro tip Don’t store batteries in a hot car or a freezing garage — extreme heat and cold shorten their life, and the charger will refuse to charge a pack that’s too hot or too cold. Bring them inside in winter and let a hot pack cool down before you charge it.
Why we like it
- ✓Two 20V MAX 5.0 Ah batteries — several times the capacity of compact drill-kit packs
- ✓DCB115 charger and a soft storage bag included
- ✓Fits every DeWalt 20V MAX tool on this list
- ✓3-year limited warranty
Keep in mind
- !The charger has one bay, so two packs charge one after the other
- !5 Ah packs are heavier and bulkier than compact ones — noticeable on the drill overhead
- Batteries
- 2 × DCB205, 20V MAX, 5.0 Ah
- Charger
- DCB115
- Bag
- Soft storage bag
- Model
- DCB205-2CK
All seven run on the same DeWalt 20V MAX battery. That’s the rule worth following whichever brand you pick: choose one system and stay in it, buy the first tool as a kit with batteries and a charger, and every tool after it as a bare tool.