6 Car Care Tools Every Garage Should Have
Air up the tires, check the pressure, read the warning light, start a dead battery, sit at wheel height and catch the oil — six tools for the home garage.
Published October 13, 2026 · 6 picks
At a glance
6 picksAs an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
DEWALT 20V MAX Air Inflator (DCC020IB, Tool Only)
Fills tires from a 20V battery, the car's 12V socket or the wall.
Most tire inflators do one thing. This one has two modes: a high-pressure mode for tires, which stops on its own at the pressure you set, and a high-volume mode that moves a lot of air at low pressure — and can also suck it back out of an air mattress.
The more practical trick is power. It runs on any DEWALT 20V MAX battery, but it also has a 12V cord for the car and plugs into a wall outlet, so a dead battery never leaves you without air. If you already own DEWALT 20V tools, it fits straight into what you have.
Pro tip Set the target pressure from the sticker on the driver’s door jamb, not the number on the tire sidewall — the sidewall shows the tire’s maximum, not what your car needs.
Why we like it
- ✓Three power sources — 20V MAX battery, 12V DC car socket or 110V AC outlet
- ✓High-pressure mode with automatic shutoff at the pressure you set
- ✓Separate high-volume mode that also deflates — for mattresses and floats
- ✓Threaded chuck stays on the valve; LED light for dark corners
- ✓Onboard storage for the cords and nozzles; 3-year limited warranty
Keep in mind
- !Tool only — battery and charger are not included
- !At about 6.4 lb, it's a garage tool, not a glovebox one
- Power
- 20V MAX battery, 12V DC or 110V AC
- Modes
- High-pressure (auto shutoff), high-volume inflate/deflate
- Included
- 12V DC cord, tapered nozzle, inflator needle, Presta adapter
- Size
- About 13 × 10.2 × 5.6 in
- Weight
- About 6.4 lb (without battery)
- Warranty
- 3 years, limited
- Model
- DCC020IB
JACO ElitePro Digital Tire Pressure Gauge (100 PSI)
Checks what the inflator says, to half a PSI, with a reading that stays on screen.
Gauges built into inflators and gas-station air hoses are convenient, but they are not always right. A separate gauge is how you check them — and how you find the slow leak before the warning light does.
The ElitePro has a hose and an angled chuck, so it reaches valves tucked inside deep wheels without scraping your knuckles on the rim. It holds the reading after you take it off the valve, and the bleed button lets you drop an overfilled tire to the exact number without reconnecting.
Pro tip Check the spare when you check the other four. It’s the tire most likely to be low, and the one you only find out about on the side of the road.
Why we like it
- ✓JACO rates it ±0.5 PSI accuracy, reading in 0.1 PSI steps
- ✓Reading stays on the screen after you pull the chuck off the valve
- ✓Built-in bleed valve lets air out while you watch the number drop
- ✓10 in flexible hose with a swivel angled chuck; swaps to any 1/4 in NPT chuck
- ✓Backlit 2.5 in display; brass and steel body in a rubber guard
Keep in mind
- !Tops out at 100 PSI — not for higher-pressure truck or RV tires above that
- !Runs on two AAA batteries (included), so keep spares around
- Range
- 0–100 PSI (also bar, kPa, kgf/cm²)
- Accuracy
- ±0.5 PSI (per JACO, ANSI 2A)
- Resolution
- 0.1 PSI
- Hose
- 10 in, swivel angled chuck, 1/4 in NPT
- Display
- 2.5 in backlit LCD, auto-off after 150 s
- Power
- 2 × AAA (included)
- Warranty
- Lifetime (JACO)
- Model
- ElitePro Digital 100 (JSP-045)
OBDLink MX+ Bluetooth OBD2 Scanner
Sends check engine codes and live data to your phone over Bluetooth.
A wired code reader tells you the code. A Bluetooth adapter like the MX+ stays plugged into the port and sends everything to your phone — codes and live data such as coolant temperature or fuel trims — so you can watch what the engine is doing while you drive or idle in the driveway.
The MX+ goes beyond generic OBD2 on several brands, and OBDLink lists it as the recommended adapter for apps like FORScan and BimmerCode. That makes it a good pick if you want to dig deeper than “what’s the code”, but it does mean the app is half of the tool.
Pro tip Look up the code and check the simple causes first — a loose gas cap, a cracked vacuum hose — before you clear it. If the light comes back after clearing, the problem is still there.
Why we like it
- ✓Works with iPhone, Android and Windows over Bluetooth
- ✓Reads and clears check engine codes, with live data on the phone screen
- ✓Enhanced OEM support for Ford, GM, Mazda, Nissan/Infiniti, Toyota/Lexus/Scion, Honda, Hyundai and Kia
- ✓Supported in third-party apps like FORScan, Torque, BimmerCode and Carista
- ✓Over-voltage and battery-drain protection; free firmware updates
Keep in mind
- !No screen — you need a phone, tablet or laptop and an app
- !What you can read beyond the engine (ABS, SRS, TPMS) depends on the car and the app — check compatibility first
- Connection
- Bluetooth
- Works with
- iOS, Android, Windows
- Power
- From the OBD2 port
- Protection
- Over-voltage, battery drain
- Size
- About 2 × 0.9 × 1.8 in
- Included
- Quick start guide, zipper case
- Model
- MX201 (428101)
GOOLOO A3 Jump Starter with Air Compressor (3000A)
Starts a dead battery without a second car, and pumps up a tire too.
A dead battery used to mean finding another car and a set of cables. A lithium jump pack does it alone: clamp it to the battery, switch it on, start the car. The A3 adds a tire inflator to the same box, so the two most common “car won’t go” problems share one kit in the trunk.
The safety features matter more than the amp number. Reverse-connection protection is there for the moment a clamp goes on the wrong post, and the BOOST button forces power out when the car battery is so flat the pack can’t detect it.
Pro tip Connect red to the battery’s positive post first, then black to bare metal on the engine or the chassis — not straight to the negative post — and keep your face away from the battery while you start the car.
Why we like it
- ✓Jump-starts 12V vehicles — GOOLOO rates it for gas engines up to 9.0 L and diesel up to 6.5 L
- ✓Built-in 150 PSI inflator with presets and automatic shutoff
- ✓Reverse-polarity, short-circuit, overcurrent and overheat protection
- ✓BOOST button for batteries too flat for the clamps to detect
- ✓USB charging for a phone, plus an LED flashlight
Keep in mind
- !Both jobs run from one battery — if you forget to charge it, you lose the jumper and the pump
- !GOOLOO says to recharge it at least every 3 months in storage; 18-month warranty
- Peak current
- 3000 A
- Engines
- Up to 9.0 L gas / 6.5 L diesel (per GOOLOO)
- Inflator
- 150 PSI max, 35 L/min, PSI/bar/kPa
- Battery
- Lithium polymer, 12,000 mAh
- Operating temperature
- -4 to 140 °F
- Charging temperature
- 14 to 113 °F
- Size
- About 5.9 × 5 × 2.3 in
- Warranty
- 18 months
- Model
- A3 (JS-506)
MaxWorks 80771 Pneumatic Roller Seat with Tool Tray
Puts you at wheel height for brakes and tires, with your sockets in the tray.
A lot of car work happens at knee height: brakes, wheels, the lower part of the bumper, a wash and wax. Kneeling on concrete for that gets old fast. A rolling seat puts you at the right height and lets you scoot from one wheel to the next without getting up.
The tray under the seat is the useful part — sockets, lug nuts and the brake cleaner can ride along with you instead of staying on the bench. The gas lift sets the height between 15 and 20 inches.
Pro tip Put the lug nuts and small bolts in the tray, not on the floor. A lug nut that rolls under the car is the one you spend ten minutes looking for.
Why we like it
- ✓Gas-lift seat adjusts from 15 to 20 in with a side lever
- ✓15-1/4 in tool tray under the seat keeps sockets and bolts close
- ✓Five 2-1/2 in swivel casters, non-marring
- ✓Thick padded seat; rated for up to 300 lb
Keep in mind
- !It's a seat only — for under-car work you still need a lay-down creeper
- !Casters are made for a smooth floor; cracks, cords and gravel stop them
- Seat height
- 15–20 in, pneumatic
- Capacity
- 300 lb
- Casters
- 5 × 2-1/2 in, swivel, non-marring
- Tool tray
- 15-1/4 in diameter
- Weight
- 10.5 lb
- Model
- 80771
Performance Tool W4071 4.5-Gallon Oil Drain Pan
Holds 4.5 gallons and pours out from a spout when the oil change is done.
The drain plug never lets the oil fall straight down. It starts as an arc that reaches out sideways, then slows to a drip right under the plug — and a small pan misses one or the other. A wide pan catches both.
The W4071 holds 4.5 gallons, which covers a pickup’s oil change, coolant from a radiator, or a drip you’re leaving under a leak overnight. The spout and the inner lip are what make it easy to empty into a jug without a funnel mess.
Pro tip Loosen the drain plug with a wrench, then turn it out the last few threads by hand while pushing it in. Pull it away fast and to the side — your hand stays dry and the plug doesn’t fall into the pan.
Why we like it
- ✓4.5-gallon (16 L) capacity — room for a truck oil change or a coolant drain
- ✓Wide opening catches the stream even when it shifts as the plug comes out
- ✓Internal anti-splash lip helps keep fluid in when you move or pour
- ✓Built-in pour spout and two molded handles
- ✓Heavy high-density polyethylene walls stay rigid with hot oil
Keep in mind
- !Open-top pan — you still need a sealed jug to take the oil to recycling
- !A full pan is heavy; slide it out level instead of lifting it at arm's length
- Capacity
- 4.5 gal (16 L)
- Material
- High-density polyethylene
- Features
- Pour spout, anti-splash lip, molded handles
- Model
- W4071